Eicon Networks 1550 User Manual
Page 22
Setup
22
Limits on Creating Profiles
If the VHSI protocol is set to X.25, you can create up to 32 connection profiles. When
set to Frame Relay, you can create up to eight connection profiles. When using PPP as
the VHSI port protocol, you may only create one profile.
Note: It is not recommended to mix Frame Relay and X.25 profiles. It is recommended that you either
create all X.25 (with or without ISDN) or all Frame Relay (with or without ISDN) profiles.
With the Eicon 1551, you can also create up to two ISDN profiles. However, the
maximum number of profiles for both X.25 and ISDN combined is still 32. This means,
that, if you create two ISDN profiles, you are then limited to 30 X.25 profiles.
If you are using PPP for the VHSI port, you can still create two ISDN profiles along with
the single PPP/VHSI profile.
What’s Next?