Eicon Networks 1550 User Manual
Page 17
Setup
17
5.
The main menu should appear, as shown below.
6.
Step 3: Select the VHSI Protocol
Troubleshooting
If you cannot access the ‘Log in’ page:
• Verify that all cables are connected properly. The power and Ethernet lights should
be on.
• Verify that your web browser is configured to use the LAN and not a dial-up
connection, and that your browser is not set to use a proxy server. See
(below) for instructions on how to do this.
• Verify that your network adapter is set to acquire its IP address automatically. See
Changing TCP/IP Settings to DHCP
for more information. Restart your computer
and try again.
Adjusting Browser Settings
If you are not able to access the configuration pages, verify your browser settings as
described below. Note that the steps may vary slightly depending on the browser
version used.
• Internet Explorer version 5 or later:
– From the ‘Tools’ menu, select ‘Internet Options’, click the ‘Connections’ tab, then
click ‘Setup’.
– Select the option ‘I want to set up my Internet connection manually’, then click ‘Next’.
– Select ‘I want to connect through a local area network’, then click ‘Next’.
– Clear all proxy options, then click ‘Next’.
– Clear the option ‘Connect to the Internet immediately’, then click ‘Finish’.