Changing parameter settings or values, Figure 4.5, 3 the drive and programming modes – Yaskawa J1000 Compact V/f Control Drive User Manual

Page 83

Text mode
Original mode

STOP

(2x)

<1> Move to the right to change parameter settings. Scroll
down to view and check settings in the Setup Mode.
<2> To return to the Top Menu, press . To view or edit
other parameters, press and .

Control Circuit

Terminal

Select digit

to edit

Parameter Display

LED Operator

Frequency reference

appears when powered up

Parameter Display

Press until

appears

<1>

<2>

Figure 4.5 Setup Group Example

Changing Parameter Settings or Values

This example explains changing C1-01 (Acceleration Time 1) from 10.0 seconds (default) to

20.0 seconds.

Step

Display/Result

1. Turn on the power to the drive. The initial display appears.

Press the

key until the Setup Mode Screen appears.

4.3 The Drive and Programming Modes

YASKAWA ELECTRIC TOEP C710606 26D YASKAWA AC Drive – J1000 Quick Start Guide

Start-Up Programming & Operation