SMA WB 3600TL - Manual (Page 84)

Decommissioning SMA Solar Technology AG
84 WB36TL_50TL-IEN102011 Installation Guide
13 Decommissioning
13.1 Dismantling the Inverter
1. Disconnect the inverter and open the bottom housing lid as described in section 7.2 ”Disconnect
the device from voltage sources” (page 59).
2. Remove all cables from the inverter.
3. If mounted with top hat rail: undo screw between wall and housing.
4. Disconnect the anti-theft protection, if applicable.
5. Push the inverter to the left and remove from the wall-mount or the top hat rail.
13.2 Packing the Inverter
If possible, always pack the inverter in its original packaging. If it is no longer available, you can also
use an equivalent carton. The box must be capable of being closed completely and made to support
both the weight and the size of the inverter.
13.3 Storing the Inverter
Store the inverter in a dry place where ambient temperatures are always between
− 25 °C and +60 °C.
13.4 Disposing of the Inverter
Dispose of the inverter at the end of its service life in accordance with the disposal regulations for
electronic waste which apply at the installation location at that time. Alternatively, send it back to SMA
Solar Technology AG with shipping paid by sender, and labeled "ZUR ENTSORGUNG"
("FOR DISPOSAL") (contact see section 16 ”Contact” (page 92)).
CAUTION!
Danger of burn injuries due to hot enclosure parts.
• Wait 30 minutes for the housing to cool down.