SMA WB 3600TL - Manual (Page 60)

Disconnecting the Inverter SMA Solar Technology AG
60 WB36TL_50TL-IEN102011 Installation Guide
6. Loosen all six captive screws and remove the
bottom housing lid.
7. Ensure there is no current at any DC cables using a
clip-on ammeter.
☑ If there is a current present, check the
installation.
8. Unlock the connected DC plug connectors using a
screwdriver:
– Insert a screwdriver into one of the slits on the
sides (1).
– Lever the screwdriver upward (2) and pull out
the plug connector (3).