SMA WB 3600TL - Manual (Page 43)

SMA Solar Technology AG Electrical Connection
Installation Guide WB36TL_50TL-IEN102011 43
5.5.2 Setting the Country Standard and Language using Rotary
Switches
1. Disconnect the inverter as described in section 7 ”Disconnecting the Inverter” (page 59).
2. Set the arrows on both rotary switches (A and B)
using a screw driver (2.5 mm) to the desired
positions (see table in section 5.5.1 ”Checking the
Country Standard” (page 40)).
3. Re-commission the inverter as described in section 8 ”Restarting the system” (page 62).
Jumper for English language
You can also set the language to English by
means of a jumper (e.g. for service purposes in
other countries). To do so, plug the jumper
onto the upper two pins as shown on the right.