SMA WB 3600TL - Manual (Page 70)

Messages SMA Solar Technology AG
70 WB36TL_50TL-IEN102011 Installation Guide
11 Messages
11.1 Event messages
During an update, the relevant display message is shown in the text line of the display.
Display Description
< Inst. code valid > The Grid Guard Code entered is valid.
The configured country data set is now unblocked
and can be changed.
If the configured country data set is protected, the
unlocking is valid for a maximum of 10 feed-in
hours.
< No new update SDcard > There is no update relevant for this inverter on the
SD card or the present update has already been
installed.
< Grid param.unchanged > The selected switch setting is not programmed or
there is no country data set available on the SD
card.
< Parameters set successfully > A new country data set has been configured.
< SD card is read > The inverter is currently reading the SD card.
< Set parameter > The inverter sets the adjusted parameters.
< Update completed > The inverter has successfully completed the
update.
< Update Bluetooth > Successful update of the Bluetooth components.
< Update display > Successful display update.
< Update main CPU > Successful update of inverter component.
< Update communication > Successful update of communication component.
< Update RS485I module > Successful update of communication interface.
< Upd. language table > Successful update of language table.
< Update file OK > The file found is valid.