SMA WB 3600TL - Manual (Page 75)

SMA Solar Technology AG Messages
Installation Guide WB36TL_50TL-IEN102011 75
65 < Overtemperature >
Inverter switches off due to excess
temperature. • Ensure sufficient ventilation.
• Check heat dissipation, as described
in section 9.1 ”Checking Heat
Dissipation” (page 65).
66 < Overload > • Contact the SMA Serviceline (see
section 16 ”Contact” (page 92)).
67 < Comm. disturbed >
A fault has occurred in the internal
communication of the inverter. However,
the inverter continues feeding into the grid. If this event occurs often:
• Contact the SMA Serviceline (see
section 16 ”Contact” (page 92)).
68 - 70 < Interference device > • Contact the SMA Serviceline (see
section 16 ”Contact” (page 92)).
71 < SD card defective > Re-format the SD card.
• Re-save the files to the SD card.
< Parameter file not found or defective > • Copy the parameter file into the card
drive:\PARASET directory.
< Param. setting failed > • Check the parameters for valid
values.
• Ensure authentication for
modification with Grid Guard Code.
< Update file defect. > • Re-format the SD card.
• Re-save the files to the SD card.
< No update file found > • Copy the update file into the SD card
drive:\UPDATE directory.
72 < Data stor. not poss. >
Internal device fault: however, the inverter
continues to feed in. • If this fault occurs often, contact the
SMA Serviceline (see
section 16 ”Contact” (page 92)).
Event no. Cause Corrective measures