SMA WB 3600TL - Manual (Page 38)

Electrical Connection SMA Solar Technology AG
38 WB36TL_50TL-IEN102011 Installation Guide
3. To create the seal on the inverter, all DC inputs that
are not required must be closed as follows:
– Insert the sealing plugs provided into the
DC plug connectors that are not needed.
Do not insert the blank plugs into the DC inputs
on the inverter.
– Insert the DC plug connectors with sealing plugs
into the corresponding DC inputs on the inverter.
☑ Windy Boy Protection Box has been connected.
You can now commission the inverter as described
in section 6 ”Initial start-up” (page 50). The
following connection options are optional.