HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 91)

HEIDENHAIN TNC 320 91
4.8 The Er
ro
r Messag
e
s
Detailed error messages
The TNC displays possible causes of the error and suggestions for
solving the problem:
8 Open the error window.
8 Information on the error cause and corrective action:
Position the highlight on the error message and press
the MORE INFO soft key. The TNC opens a window
with information on the error cause and corrective
action.
8 Leave Info: Press the MORE INFO soft key again.
INTERNAL INFO soft key
The INTERNAL INFO soft key supplies information on the error
message. This information is only required if servicing is needed.
8 Open the error window.
8 Detailed information about the error message:
Position the highlight on the error message and press
the INTERNAL INFO soft key. The TNC opens the
window with internal information about the error
8 To leave Details, press the INTERNAL INFO soft key
again.
Deleting errors
Clearing errors outside of the error window:
8 To clear the error/message in the header: Press the
CE button.
Clearing more than one error:
8 Open the error window.
8 Clear individual errors: Position the highlight on the
error message and press the DELETE soft key.
8 Clear all errors: Press the DELETE ALL soft key.
In some operating modes (such as the Editing mode), the
CE button cannot be used to clear the error, since the
button is reserved for other functions.
If the cause of the error has not been removed, the error
message cannot be deleted. In this case, the error
message remains in the window.