HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 480)

480
M101
M102 Automatic tool change with replacement tool if maximum tool life has expired
Cancel M101 „
„
Page 109
M107
M108 Suppress error message for replacement tools with oversize
Reset M107 „
„
Page 108
M109
M110
M111
Constant contouring speed at tool cutting edge
(increase and decrease feed rate)
Constant contouring speed at tool cutting edge
(feed rate decrease only)
Reset M109/M110
„
„
„
Page 171
M116
M117 Feed rate for rotary tables in mm/minn
Reset M116 „
„
Page 177
M118 Superimpose handwheel positioning during program run
„
Page 173
M120 Pre-calculate radius-compensated contour (LOOK AHEAD) „ Page 172
M126
M127 Permit zero crossover on 360° rotary axes
Cancel M126 „
„
Page 178
M140 Retraction from the contour in the tool-axis direction „ Page 174
M141 Suppress touch probe monitoring „ Page 175
M143 Delete basic rotation
„
Page 175
M148
M149 Retract the tool automatically from the contour at NC stop
Cancel M148 „
„
Page 176
M Effect Effective at block Start End Page
The machine tool builder may add some M functions that
are not described in this User’s Manual. Also, the machine
tool builder can change the meaning and effect of the M
functions described here. Refer to your machine manual.