HEIDENHAIN TNC 320 (340 551-02) - Manual (Page 468)

468 14 Tables and Overviews
14.3 T
e
c
h
nical Inf
o
rm
ation
Touch Probe Cycles „ Calibrate touch probe
„
Compensating workpiece tilt manually and automatically
„ Setting the datum manually and automatically
„ Automatic workpiece measurement
„ Cycles for automatic tool measurement
Specifications
Components „ Main computer with TNC keyboard and integrated 15.1-inch TFT color flat-panel display
with soft keys
Program memory „ 10 MB (on compact flash memory card CFR)
Input resolution and display
step „ To 0.1 µm for linear axes
„ To 0.0001° for angular axes
Input range
„
Maximum 999 999 999 mm or 999 999 999°
Interpolation „ Line in 4 axes
„ Arc in 2 axes
„
Helix: combination of circular and linear motion
Block processing time
3-D straight line without radius
compensation „ 6 ms (3-D straight line without radius compensation)
Axis feedback control
„
Position loop resolution: Signal period of the position encoder/1024
„ Cycle time of position controller: 3 ms
„ Cycle time of speed controller: 600 µs
Traverse range
„
Maximum 100 m (3937 inches)
Spindle speed „ Maximum 100 000 rpm (analog speed command signal)
Error compensation „ Linear and nonlinear axis error, backlash, reversal spikes during circular movements,
thermal expansion
„ Stiction
Data Interfaces
„
One each RS-232-C /V.24 max. 115 kilobaud
„ Expanded data interface with LSV-2 protocol for remote operation of the TNC through
the data interface with the HEIDENHAIN software TNCremo
„ Ethernet interface 100 Base T
approx. 2 to 5 megabaud (depending on file type and network load)
„ 2 x USB 1.1
Ambient Temperature „ Operation: 0 °C to +45 °C
„ Storage: –30 °C to +70 °C
User functions