Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 88)

2. Proceed as follows:
• If the K2 SAN is basic (non-redundant), in the list view, right-click the iSCSI network and
select
Details .
• If the K2 SAN is redundant, in the list view, first right-click the primary iSCSI network and
select
Details . Then proceed to modify the primary iSCSI network. After the primary iSCSI
network is modified, repeat these steps and modify the secondary iSCSI network.
The Network Settings dialog box opens.
88 K2 SAN Installation and Service Manual 02 February 2012
Planning and implementing a K2 SAN with SiteConfig