Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual
Page 152
Control point PC
•
Ethernet cable connected
•
Control Point software installed
•
Control network IP address assigned
•
Network communication over the control network with all other K2 devices
•
Power on
Ethernet switch
•
Ethernet cables connected
•
Control network IP address assigned
•
VLANs set up
•
Trunks set up
•
Power on
K2 Media Server
•
Ethernet cables connected
•
Fibre Channel cable connected
•
Redundant servers connected by serial cable
•
Software installed, as from the factory, including QuickTime 7
•
Control network IP address assigned
•
Power on for all servers
K2 RAID chassis
•
Fibre Channel cable(s) connected
•
Ethernet cable(s) connected
•
Power on
K2 RAID Expansion chassis (optional)
•
Fibre channel cable(s) connected
•
Power on
152
K2 SAN Installation and Service Manual
02 February 2012
Configuring and licensing the K2 SAN