Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 146)

Click Next .
You do not need to enter or configure anything on this page.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page - Basic K2 SAN
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next .
The Completing the Configuration Wizard page opens.
2. Click Finish .
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Proceed as follows:
• If you have NH servers, configure them next.
• If you do not have NH servers, configure K2 clients and/or other iSCSI clients on the K2 SAN
next.
146 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN