Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual
Page 238
Configure File System Client Configuration page
This page connects the SAN client as a media file system client to the K2 Media Server taking the
role of media file system server. If there are redundant K2 Media Servers, both are listed on this
page as file system servers.
1. Verify that the K2 client is connecting to the correct K2 Media Server or Servers, as follows:
•
For a basic (non-redundant) K2 SAN, the client connects to the only server.
•
For a redundant K2 SAN, the client connects to server A as file system server 1 and server
B as file system server 2.
2. Click
Check
.
3. When the wizard reports that the configuration check is successful, click
Next
.
The iSCSI Initiator Configuration page opens.
238
K2 SAN Installation and Service Manual
02 February 2012
Configuring clients on the K2 SAN