Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 229)

Chapter
8
Configuring clients on the K2 SAN
This section contains the following topics:
• About iSCSI bandwidth
• Determining K2 client bandwidth requirements
• K2 SAN prerequisites for adding clients
• Configuring a K2 client for the K2 Storage System
• Adding a generic client device
• Assigning a SAN client to different FTP server
• Powering on/off a SAN client
• Taking a SAN client offline
02 February 2012 K2 SAN Installation and Service Manual 229