Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 351)

18. Click the Apply button. In the Save Zoning & Error Check dialog, click Save Zoning , then Yes ,
OK , and Close on to save changes to the zoning database.
19. Close the Edit Zoning dialog box.
20. Connect to the other switch as necessary to configure. In SANsurfer Switch Manager, expand
the tree view and select the other Fibre Channel switch. For the purposes of this procedure, this
switch is designated as switch B.
The Faceplate display opens.
21. Open the Switch menu and select Switch Properties .
The Switch Properties dialog box opens.
22. Set Domain ID to 2 .
23. Set Domain ID lock to Enable .
24. Click OK .
SANsurfer Switch Manager updates the switch. When a message box reports status complete,
click
OK .
The Switch Properties dialog box closes.
25. Open the Zoning menu, and select Edit Zoning to open the Edit Zoning dialog.
26. Open the Edit menu, and select Create Zone Set to open the Create A Zone Set dialog.
27. Enter ZoneSetB as the name for the zone set and click the OK button.
The new zone set name is displayed in the Zone Sets tree.
28. Right-click ZoneSetB and select Create A Zone from the popup menu.
29. In the Create a Zone dialog, enter Zone3 as the name for the new zone and click the OK button.
The new zone name is displayed in the Zone Sets tree.
30. Right-click ZoneSetB and select Create A Zone from the popup menu.
31. In the Create a Zone dialog, enter Zone4 as the name for the new zone and click the OK button.
The new zone name is displayed in the Zone Sets tree.
32. Click the Apply button to save changes to the zoning database.
02 February 2012 K2 SAN Installation and Service Manual 351
Custom K2 SAN systems