beautypg.com

Reorder adapters – Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual

Page 291

background image

4. Reconcile the locations assigned to the adapter names with the names as currently configured in

the Name column as follows:

On systems with no 10 Gig network interface card installed, the required mapping of names
to locations is specified as follows:

Must be named as follows:

The adapter name (as displayed in the Device
Name column) that is assigned to this
location…

Control Connection

PCI bus 1, device 0, function 0

FTP-Streaming Connection

PCI bus 1, device 0, function 1

Unused Connection 1

PCI bus 2, device 0, function 0

Unused Connection 2

PCI bus 2, device 0, function 1

On systems with a 10 Gig network interface card installed, the required mapping of names
to locations is specified as follows:

Must be named as follows:

The adapter name (as displayed in the Device
Name column) that is assigned to this
location…

Control Connection

PCI bus 1, device 0, function 0

Unused Connection 0

PCI bus 1, device 0, function 1

Unused Connection 1

PCI bus 2, device 0, function 0

Unused Connection 2

PCI bus 2, device 0, function 1

FTP 10G Connection

PCI bus 5, device 0, function 0

The 10 Gig network interface adapter must be named

FTP 10G Connection

. If it has

dual-ports, name the other connection

Unused Connection 3 10G

.

5. Proceed as follows:

If all the names on this system are configured correctly to locations, skip the rest of this
procedure.

If names on this system are not configured correctly to locations, for each adapter name
incorrectly configured, complete the remaining steps of this procedure.

6. Select the name in the Name column.

7. Select

File | Rename

to enter rename mode.

8. Type the name required for the location.

Next, reorder adapters.

Reorder adapters

Before beginning this task, make sure of the following:

Adapters are named correctly according to their PCI bus location

The control team is created

02 February 2012

K2 SAN Installation and Service Manual

291

Administering and maintaining the K2 SAN