Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 349)

7. Open the Edit menu, and select Create Zone Set to open the Create A Zone Set dialog.
8. Enter ZoneSetA as the name for the zone set, and click the OK button.
The new zone set name is displayed in the Zone Sets tree. A zone set name must begin with a
letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _, -, ^, and $.
9. Right-click ZoneSetA and select Create A Zone from the popup menu.
10. In the Create a Zone dialog, enter Zone1 as the name for the new zone and click the OK button.
The new zone name is displayed in the Zone Sets tree.
NOTE: If you enter the name of a zone that already exists in the database, the SANsurfer
Switch Manager application will ask if you would like to add that zone and its membership to
the zone set.
11. Right-click ZoneSetA and select Create A Zone from the popup menu.
02 February 2012 K2 SAN Installation and Service Manual 349
Custom K2 SAN systems