Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual
Page 143
•
New file system made
This page checks on the configuration of the K2 Media Server in one of its main roles as a file
system server. The K2 Media Server also functions as a file system client, which is also checked
from this page.
1. In K2Config open the server's File System Server Configuration page, if the page is not already
open.
2. If desired, configure reference file generation.
3. Click
Check
.
4. When the wizard reports that the configuration is correct, click
Next
.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The iSCSI Bridge Server Configuration page opens.
Related Topics
Configuring reference file type on a K2 SAN system
on page 280
02 February 2012
K2 SAN Installation and Service Manual
143
Configuring and licensing the K2 SAN