Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual
Page 222
2. Do not select
Reserved Bandwidth
unless instructed to do so by Grass Valley. This system is
usually not configured for RVIO.
3. Click
Check
.
4. When the wizard reports that the configuration is correct, click
Next
.
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
The FTP Server Configuration page opens.
Configure FTP Server Configuration page - NH server A
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click
Next
.
The Completing the Configuration Wizard page opens.
2. Click
Finish
.
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Next, configure the other NH server.
222
K2 SAN Installation and Service Manual
02 February 2012
Configuring and licensing the K2 SAN