Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 80)

Install prerequisite files on the SiteConfig PC
Some software components share common prerequisite software. You must install a prerequisite
software package on the SiteConfig PC to make the prerequisite software available for software
deployment to devices.
1. Check release notes for the required version of prerequisite files, if any.
2. On the SiteConfig PC, open Windows Add/Remove programs and look for Grass Valley
Prerequisite Files , then proceed as follows:
• If the required version of prerequisite files is installed, do not proceed with this task.
• If prerequisite files are not installed or are not at the required version, proceed with this task.
3. Procure the required prerequisite software installation file. The file name is Prerequisite
Files.msi .
4. On the SiteConfig PC, run the installation file. The installation program copies prerequisite files
to C:\Program Files\Grass Valley\Prerequisite Files .
80 K2 SAN Installation and Service Manual 02 February 2012
Setting up the K2 SAN infrastructure