Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 224)

The Software Configuration page opens.
Configure Software Configuration page - NH server
This page checks for the software required to support the roles you selected on the previous page.
NOTE: MPIO software is required on K2 Media Servers in nearline redundant systems.
1. If software with Yes in the Required column reports as Not Installed , install the software.
2. Click Check Software .
3. When all required software reports as Installed , click Next .
The Network Configuration page opens.
Related Topics
Installing Multi-Path I/O Software on page 232
224 K2 SAN Installation and Service Manual 02 February 2012
Configuring and licensing the K2 SAN