Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 239)

Configure iSCSI Initiator Configuration page - K2 client
This page lists the iSCSI adapter on your K2 Media Server as an iSCSI target. The K2Config
application subscribes the SAN client to the iSCSI target and allocates bandwidth, based on the
bandwidth values that you enter. The K2Config application keeps track of each SAN client's
bandwidth, and when the total amount allowed by the K2 SAN license is consumed, the K2Config
application displays an informative message and then disables your ability to add more SAN clients.
For large systems the K2Config application can load balance SAN clients across multiple iSCSI
targets.
02 February 2012 K2 SAN Installation and Service Manual 239
Configuring clients on the K2 SAN