Configuring nh server - part 1 – Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 User Manual
Page 192
Configure New K2 System page 3 - Nearline K2 SAN
1. Review the information on this page and verify that you have correctly defined your K2 SAN.
For a 10G redundant nearline K2 SAN you should have the following:
•
Two Gigabit Ethernet switches
•
Two K2 Media Servers
2. Click
Finish
.
The Define New K2 Storage System wizard closes.
Your storage system appears in the tree view of the K2Config application.
Next, configure the server.
Configuring NH server - Part 1
1. In the K2Config application tree view, select
[K2Server1]
.
For the basic nearline K2 SAN, this is the only NH server.
2. Click the
Configure
button.
The Configure K2 Server wizard opens to the Define server roles page.
192
K2 SAN Installation and Service Manual
02 February 2012
Configuring and licensing the K2 SAN