Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 23)

Preface
About this document
This is a K2 ™ product manual. It describes the K2 10G Storage Area Network (SAN) and provides
instructions for installing and using the product in a variety of applications. The manual contains
information for K2 storage in both basic (non-redundant) and redundant configurations. Refer to
the sections that apply your K2 SAN's configuration. For custom K2 SANs that do not fit one of
these pre-defined levels, you must work with your Grass Valley representative for installation and
operation.
The K2 10G SAN, as documented with this manual, is characterized by 10 Gig iSCSI connections
and 8 Gig Fibre Channel connections. The K2 10G SAN requires K2 software version 7.3 and
higher. Some devices and/or systems used with older K2 SANs are not compatible with the K2 10G
SAN system. Consult "K2 Release Notes" for compatibility information.
For information on products that are compatible as clients to the K2 SAN, refer to those product’s
manuals, such as the "STRATUS Installation and Service Manual" and the "K2 FCP Connect
Installation Manual".
For more information
The following sections help you find the information you need in product manuals and elsewhere.
For the installer of a standalone K2 product with internal storage
If you are installing a K2 system, such as a K2 Summit/Solo system, with standalone internal storage,
refer to documentation in the following sequence:
In these formats: In these locations… Find this document…
PDF file Grass Valley Website K2 Release Notes 1
Printed K2 product shipping box Quick Start Guide for the K2 product 2
PDF file K2 Documentation Set
PDF file Grass Valley Website
PDF file K2 Documentation Set K2 System Guide 3
PDF file Grass Valley Website
For the installer of a K2 product with direct connect storage
If you are installing a standalone K2 system, such as a K2 Summit system, with direct connect
external RAID storage, refer to documentation in the following sequence:
02 February 2012 K2 SAN Installation and Service Manual 23