Grass Valley K2 (Summit 3G) 10Gv2 Storage Area Network Installation v.8.1 - Manual (Page 235)

The Software Configuration page opens.
Configure Software Configuration page - K2 client
This page checks the client for required software.
NOTE: Multi-Path I/O software must be installed on K2 clients connected to a redundant K2
SAN.
1. If software with Yes in the Required column reports as Not Installed , install the software.
2. Click Check Software .
3. When all required software reports as Installed , click Next .
The Network Configuration page opens.
02 February 2012 K2 SAN Installation and Service Manual 235
Configuring clients on the K2 SAN