Grass Valley K2 System Guide v.9.0 - Manual (Page 49)

RAID drive numbering K2 Solo system
In the K2 Solo system, internal RAID drives are numbered as follows.
Disk 0
Disk 1
NOTE: K2 Solo system drives are always configured as RAID 0.
When drives are configured as RAID 0, each drive is considered its own LUN. As such, the order
of LUNs and drive numbers as displayed in Storage Utility does not always correlate with the position
of drives in the chassis.
06 November 2012 K2 System Guide 49
Product description