Grass Valley K2 System Guide v.9.0 - Manual (Page 269)

Mounting the Rack Slides
Choose the proper set of rail mounting holes on the rack. Notice that the hole spacing can vary with
the rack type. When mounting the slides in racks with EIA spacing, make sure that the slides are
attached to the 0.5-inch spaced holes.
Front and rear rack rail mounting hardware is provided with the rack mount kit. Mount the rails
using the enclosed hardware. Make sure the stationary sections are horizontally aligned and are
level, as well as parallel to each other.
06 November 2012 K2 System Guide 269
Rack mounting