Grass Valley K2 System Guide v.9.0 - Manual (Page 223)

Specification Parameter
lines 10-20 NTSC (525 Line); lines 10-22 PAL (625 Line)
VITC is decoded on each SDI input and inserted on each SDI output.
VITC Reader configurable for a search window (specified by two
lines) or set to manual mode (based on two specified lines).
VITC Writer inserts VITC data on two selectable lines per field in
the vertical interval. The two lines have the same data.
VITC is not decoded off of the video reference input.
VITC waveform
RS-422 specification K2 Summit 3G system
The RS-422 interface conforms to ANSI/SMPTE 207M-1997 standard (SMPTE 422).
The K2 Summit/Solo system specification is shown in the following table.
Description Characteristic
1 per channel Number of Inputs/Outputs
Female RJ45 Connector type
RS-422 specification first generation K2 Summit/Solo system
The RS-422 interface conforms to ANSI/SMPTE 207M-1997 standard (SMPTE 422).
The K2 Summit/Solo system specification is shown in the following table.
Description Characteristic
1 per channel Number of Inputs/Outputs
Female DB9 pin Connector type
GPI I/O specifications
The K2 Summit/Solo system specification is shown in the following table.
Description Characteristic
12 inputs and 12 outputs. Number of Inputs/Outputs
Female DB 25pin Connector type
TTL 0-0.8 V Low; 2.4-5 V High; 1 mA external current sink GPI Input
06 November 2012 K2 System Guide 223
Specifications