Grass Valley K2 System Guide v.9.0 - Manual (Page 149)

3. Configure the settings for the network as follows:
For control network Setting...
Ethernet is required Type
Control is required Usage
None is required. This is true even on a redundant K2 SAN. (Only the
iSCSI network is redundant on a redundant K2 SAN.) Redundancy
Control is recommended Name
Unselected is required Exclude from Host
Files
Selected is required Managed
The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required. Base IP Address
The number of IP addresses in the range managed by SiteConfig.
Required. Number of Addresses
The network's subnet mask. Required. Subnet Mask
Additional network settings managed by SiteConfig. Allowed. Gateway IP Address
Unselected is required. Related settings are disabled. Unmanaged
Servers providing DNS for name resolution. Allowed. DNS Servers
Not allowed Default Interface
Name Suffix
4. Click OK to save settings and close.
Creating the FTP/streaming network for stand-alone K2 clients (optional)
If you transfer media to/from the stand-alone K2 client, create a FTP/streaming network.
1. In the Network Configuration | Networks tree view, select a System node or a Site node.
2. Proceed as follows:
• To add a network under the currently selected node, in the tree view right-click the node and
select
Add Network .
The Network Settings dialog box opens.
06 November 2012 K2 System Guide 149
Managing stand-alone K2 systems with SiteConfig