Grass Valley K2 System Guide v.9.0 - Manual (Page 216)

K2 Summit transmission models specifications
Refer to the section about K2 Summit Transmission models for specifications unique to that system.
If a specification is not unique to a K2 Summit Transmission model, then the general K2 Summit/Solo
system specification found in this section applies.
Related Topics
K2 Summit Transmission models on page 197
AC power specification
Table 4: K2 Summit 3G AC power specification
Specification Characteristic
Dual, redundant Power supply
90 to 260V auto-range, 47-63Hz Mains Input Voltage
450W typical (standalone)
390W typical (SAN client)
Maximum AC current 8A @ 115VAC, 4A @ 230VAC
Power consumption
The specification is shown in the following table.
Table 5: First-generation K2 Summit AC power specification
Specification Characteristic
Dual, redundant Power supply
90 to 260V auto-range, 47-63Hz Mains Input Voltage
350W typical (standalone)
300W typical (SAN-attached)
Maximum AC current 7A @ 115VAC, 3.5A @ 230VAC
Power consumption
The specification is shown in the following table.
Table 6: First-generation K2 Solo and K2 Solo 3G Media Server AC power specification
Specification Characteristic
Single Power supply
100-240V, 50/60 Hz Mains Input Voltage
180W typical
Maximum AC current 4A @ 115VAC, 2A @ 230VAC
Power consumption
216 K2 System Guide 06 November 2012
Specifications