Adding a group – Grass Valley K2 System Guide v.9.0 User Manual
Page 150

3. Configure the settings for the network as follows:
For FTP/streaming network
Setting...
Ethernet is required
Type
FileTransfer is required
Usage
None is required. This is true even on a redundant K2 SAN. (Only the
iSCSI network is redundant on a redundant K2 SAN.)
Redundancy
Streaming is recommended
Name
Unselected is required
Exclude from Host
Files
Selected is required
Managed
The first (lowest) IP address in the range of IP addresses managed by
SiteConfig. Required.
Base IP Address
The number of IP addresses in the range managed by SiteConfig.
Required.
Number of Addresses
The network's subnet mask. Required.
Subnet Mask
Additional network settings managed by SiteConfig. Allowed.
Gateway IP Address
Unselected is required. Related settings are disabled.
Unmanaged
Servers providing DNS for name resolution. Allowed.
DNS Servers
_he0 is required
Default Interface
Name Suffix
4. Click
OK
to save settings and close.
Adding a group
1. In the
Network Configuration | Networks
tree view, right-click a site node and select
Add Group
.
The group appears in the tree view.
2. Right-click the group and select
Rename
.
3. Enter the desired name for the group.
150
K2 System Guide
06 November 2012
Managing stand-alone K2 systems with SiteConfig