Grass Valley K2 System Guide v.9.0 - Manual (Page 264)

Description Signal Pin #
Frame Ground GND 1
Differential Transmit Data (low) -TXD 2
Differential Receive Data (high) +RXD 3
Transmit Signal Common GND 4
Spare NC 5
Receive Signal Common GND 6
Differential Transmit Data (high) +TXD 7
Differential Receive Data (low) -RXD 8
Signal Ground GND 9
LTC connectors pinouts
The K2 Summit/Solo system LTC panel connector provides balanced linear timecode input and
output connections. The interface conforms to SMTPE 12M Linear Timecode.
On the K2 Summit/Solo system there is one 6 pin Switchcraft TRA6M Mini-XLR male connector
for each channel. Pinouts are as follows:
Description Signal Pin #
IN_P<0> 1
IN_N<0> 2
Frame Ground GND 3
OUT_P<0> 4
OUT_N<0> 5
Frame Ground GND 6
264 K2 System Guide 06 November 2012
Connector pinouts