Grass Valley K2 System Guide v.9.0 User Manual
Page 158
6. Configure naming settings as follows:
For network interface Control Team
Setting...
The device host name. Required.
Interface Name
Not recommended
Set To Default
Allowed, if applicable to the network. The DNS suffix is added to the
interface name.
DNS Suffix
Not allowed
Aliases
Unselected is required. Since not selected, the default behavior occurs, which
is to use the device host name in the hosts file.
Use Interface
Name/Aliases in
Host Files
7. Evaluate settings on the Planned tab and change if necessary.
•
Compare settings on the Planned tab with settings on the Current tab.
•
If you want to keep the current settings as reported in the Current tab, click
Remove
to remove
the planned settings.
•
Do not specify multiple IP addresses for the same interface. Do not use the Add button.
•
Refer to SiteConfig Help Topics for information about planned and current IP configuration.
158
K2 System Guide
06 November 2012
Managing stand-alone K2 systems with SiteConfig