Grass Valley K2 System Guide v.9.0 - Manual (Page 147)

4. In the Network Configuration | Devices tree view, right-click the System node or a Site node and
select Add Site .
The New Site Wizard opens.
5. Enter a name for the site you are creating, considering the following:
• Keep the site name short, as it becomes the root identifier that is the default prefix for device
and network names.
• Sites in the tree view are automatically sorted alphabetically.
6. Select Custom and click Next .
7. Click Finish to create the site.
The site is displayed in SiteConfig in the tree view with groups and device placeholders displayed
under the site node. New networks are displayed in the tree view of networks in the Networks tab.
Creating the control network for stand-alone K2 clients
1. In the Network Configuration | Networks tree view, select a System node or a Site node.
06 November 2012 K2 System Guide 147
Managing stand-alone K2 systems with SiteConfig