Amer Networks SS2R48G4i V2 - Manual (Page 88)

SS2R24G4i/SS2R48G4i
77
7.4 Port Troubleshooting
7.4.1 Monitor and Debug Command
7.4.1.1 clear counters ethernet
Command clear counters [ethernet ]
Function Clear counters information on Ethernet interface
Parameters is the port ID of Ethernet
Command Mode Admin Mode
Default Do not delete the counters information on Ethernet interface
7.4.1.2 show interface ethernet
Command show interface ethernet
Function To display the information of the ports on the specified switch.
Parameters is the port ID, the format and value range of the port ID is explained in the
port introduction part of this chapter.
Command Mode Admin Mode