Amer Networks SS2R48G4i V2 - Manual (Page 169)

SS2R24G4i/SS2R48G4i
158
dns-server
[address1[address2[…address8]]]
no dns-server
Configures DNS server for DHCP clients
domain-name
no domain-name
Configures Domain name for DHCP
clients; the “no domain-name” command
deletes the domain name.
netbios-name-server
[address1[address2[…address8]]]
no netbios-name-server
Configures the address for WINS server
netbios-node-type
｛b-node|h-node|m-node|p-node|
e-number>｝
no netbios-node-type
Configures node type for DHCP clients
bootfile
no bootfile
Configures the file to be imported for
DHCP clients on boot up
next-server
[address1[address2[…address8]]]
no next-server
[address1[address2[…address8]]]
Configures the address of the server
hosting file for importing
option {ascii | hex
| ipaddress }
no option
Configures the network parameter
specified by the option code
lease (infinite | <0-365>days
(<0-23>hours (<0-59>minutes|)|))no
lease
Configures the lease period allocated to
addresses in the address pool
Global Mode
ip dhcp excluded-address
[]
no ip dhcp excluded-address
[]
Excludes the addresses in the address
pool that are not for dynamic allocation.
(3) Configure manual DHCP address pool parameters
Command Explanation
DHCP Address Pool Mode
hardware-address
[{Ethernet | IEEE802|}]
no hardware-address
Specifies the hardware address when
assigning address manually
host [ |
]
no host
Specifies the IP address to be assigned
to the specified client when binding
address manually
client-identifier
no client-identifier
Specifies the unique ID of the user when
binding address manually
client-name
no client-name
Configures a client name when binding
address manually
3.Enable logging for address conflicts
Command Explanation