Amer Networks SS2R48G4i V2 - Manual (Page 142)

SS2R24G4i/SS2R48G4i
131
access-list {deny | permit} {eigrp | gre
| igrp | ipinip | ip | <int>} {{
} | any-source | {host-source
}} {{ } |
any-destination | {host-destination }}
[precedence ] [tos
][time-range]
Creates a numbered IP
extended IP access rule for
other specific IP protocol or all
IP protocols; if the numbered
extended access-list of
specified number does not
exist, then an access-list will
be created using this number.
no access-list
Deletes a numbered extensive
IP access-list
(3)
Configuring a standard IP access-list basing on nomenclature
a. Create a name-based standard IP access-list
Command Explanation
Global Mode
ip access-list standard
no ip access-list standard
Creates a standard IP access-list based on
nomenclature; the “no ip access-list
standard
“ command delete the
name-based standard IP access-list
b. Specify multiple “permit” or “deny” rules
Command Explanation
Standard IP ACL Mode
[no] {deny | permit} {{
<sMask >} | any-source |
{host-source }}
Creates a standard name-based IP access
rule; the “no” form command deletes the
name-based standard IP access rule
c. Exit name-based standard IP ACL configuration mode
Command Explanation
Standard IP ACL Mode
Exit
Exits name-based standard
IP ACL configuration mode
(4) Configuring an name-based extended IP access-list
a. Create an extended IP access-list basing on nomenclature
Command Explanation
Global Mode
ip access-list extended
no ip access-list extended
Creates an extended IP access-list basing on
nomenclature; the “no ip access-list
extended
“ command deletes the
name-based extended IP access-list
b. Specify multiple “permit” or “deny” rules
Command Explanation
Extended IP ACL Mode