Amer Networks SS2R48G4i V2 - Manual (Page 158)

SS2R24G4i/SS2R48G4i
147
Switch(Config)#interface ethernet 0/0/1
Switch(Config-Ethernet0/0/1)#am port
Switch(Config-Ethernet0/0/1)#am ip-pool 10.1.1.1 8
Switch(Config-Ethernet0/0/1)#exit
Switch(Config)#exit
Configuration result
Switch#show am
Global AM is enabled
Interface Ethernet0/0/1 am is enable
Interface Ethernet0/0/1
am ip-pool 10.1.1.1 8 USER_CONFIG
Scenario 2
The configuration demand of the user is that the port 10 of the switch connects to the 10.1.1.0/8
segment, the administrator hopes the binding relationships between users and MAC+IP are
user1(100.1.1.1，00-00-00-00-01-12),user2(100.1.1.2，00-00-00-00-00-13).
Change Configuration
1． Enable AM function;
2． Configure MAC-IP pool;
The following is the configuration procedure
Switch(Config)#am enable
Switch(Config)#interface ethernet 0/0/10
Switch(Config-Ethernet0/0/10)#am port
Switch(Config-Ethernet0/0/10)#am mac-ip-pool 00-00-00-00-01-12 100.1.1.1
Switch(Config-Ethernet0/0/10)#am mac-ip-pool 00-00-00-00-00-13 100.1.1.2
Switch(Config-Ethernet0/0/10)#exit
Switch(Config)#exit
Configuration result
Switch#show am
Global AM is enabled
Interface Ethernet0/0/10 am is enable
Interface Ethernet0/0/10
am mac-ip-pool 00-00-00-00-00-13 100.1.1.2 USER_CONFIG
am mac-ip-pool 00-00-00-00-01-12 100.1.1.1 USER_CONFIG
16.5 AM Troubleshooting
16.5.1 AM Debug and Monitor Command