Amer Networks SS2R48G4i V2 - Manual (Page 45)

SS2R24G4i/SS2R48G4i
34
Chapter 5 Basic Switch Configuration
5.1 Basic Switch Configuration Commands
Basic switch configuration includes commands for entering and exiting the admin mode,
commands for entering and exiting interface mode, for configuring and displaying the switch clock, for
displaying the version information of the switch system, etc.
Caution !!
By default, the host name of a switch and the command line prompt is the same as the type of the
switch. In this chapter, “Switch” is used to represent general command line prompt.
5.1.1 clock set
Command clock set
Function to configure data and time setting
Parameter current time,HH The number range 0~23, MM and SS The number
range 0~59;< YYYY.MM.DD >current year/month/day, YYYY The number range 1970~2100, MM The
number range 1~12, DD The number range 1~31.
Command mode privilege configuration mode
Default The default date is 2001—Jan-01 0 0 0.
Relative command show clock
5.1.2 config
Command config [terminal]
Function to convert from admin mode to global mode.
Parameter [terminal] to configure
Command mode Admin Mode
exec timeout
Command exec timeout
Function to configure the overtime of quitting privileged configuration mode.
Parameter < minute > is time; the unit is minute(The range 0~300)
Command mode global mode
Default The default time is 5 minutes.
5.1.3 exit