Amer Networks SS2R48G4i V2 - Manual (Page 170)

SS2R24G4i/SS2R48G4i
159
Global Mode
ip dhcp conflict logging
no ip dhcp conflict logging
Enables logging for DHCP address to
detect address conflicts
Admin Mode
clear ip dhcp conflict
Deletes a single address conflict record or
all conflict records
4. Configure count of ping packets and out time
Command Explanation
Global Mode
ip dhcp ping packets
no ip dhcp ping packets
Configure count of ping packets to be be
assigned in DHCP Address pool
ip dhcp ping timeout
no ip dhcp ping timeout
Configure timeout time after set ping
packets to receive responses
18.2.2 DHCP Server Configuration Commands Example
Scenario 1
Too save configuration efforts of network administrators and users, a company is using SS2R24/48G4i
switch switch as a DHCP server. The Admin VLAN IP address is 10.16.1.2/24. The local area network
for the company is divided into network A and B according to the office locations. The network
configurations for location A and B are shown below.
PoolA(network 10.16.1.0) PoolB(network 10.16.2.0)
Device IP address Device IP address
Default gateway 10.16.1.200
10.16.1.201 Default gateway 10.16.1.200
10.16.1.201
DNS server 10.16.1.202 DNS server 10.16.1.202
WINS server 10.16.1.209 WINS server 10.16.1.209
WINS node type H-node WINS node type H-node
Lease 3 days Lease 1 days
In location A, a machine with MAC address 00-03-22-23-dc-ab is assigned with a fixed IP address of
10.16.1.210 and named as “management”.
Switch(Config)#interface vlan 1
Switch(Config-If-Vlan1)#ip address 10.16.1.2 255.255.255.0
Switch(Config--If-Vlan1)#exit
Switch(Config)#ip dhcp pool A
Switch(dhcp-A-config)#network 10.16.1.0 24
Switch(dhcp-A-config)#lease 3
Switch(dhcp-A-config)#default-route 10.16.1.200 10.16.1.201
Switch(dhcp-A-config)#dns-server 10.16.1.202