Amer Networks SS2R48G4i V2 - Manual (Page 188)

SS2R24G4i/SS2R48G4i
177
no class-map <class-map-name> map mode; the “no class-map
<class-map-name>
” command
deletes the specified class map.
match {access-group <acl-index-or-name>
| ip dscp <dscp-list> | ip precedence
<ip-precedence-list> | vlan <vlan-list>|cos
}
no match {access-group | ip dscp | ip
precedence | vlan |cos}
Set matching criterion (classify data
stream by ACL, DSCP, VLAN or
priority, etc) for the class map; the “no
match {access-group | ip dscp |
ip precedence | vlan |cos} ”
command deletes specified matching
criterion.
3．Configure a policy map.
Command Explanation
Global Mode
policy-map <policy-map-name>
no policy-map <policy-map-name>
Create a policy map and enter policy
map mode; the “no policy-map
<policy-map-name>
” command
deletes the specified policy map.
class <class-map-name>
no class <class-map-name>
After a policy map is created, it can be
associated to a class. Different policy
or new DSCP value can be applied to
different data streams in class mode;
the “no class <class-map-name>”
command deletes the specified class.
set {ip dscp <new-dscp> | ip precedence
<new-precedence>|cos }
no set {ip dscp | ip precedence |cos}
Assign a new DSCP and IP
precedence value for the classified
traffic; the “no set {ip dscp | ip
precedence |cos}
” command cancels
the newly assigned value.
police <rate-bps>
[exceed-action {drop |
policed-dscp-transmit}]
no police <rate-bps>
[exceed-action {drop |
policed-dscp-transmit}]
Configure a policy to classify traffic,
data stream exceeding the limit will be
dropped or degraded; the “no police
<rate-kbps>
[exceed-action {drop |
policed-dscp-transmit}] ” command
deletes the specified policy.
mls qos aggregate-policer
<aggregate-policer-name>
exceed-action {drop
|policed-dscp-transmit}
no mls qos aggregate-policer
<aggregate-policer-name>
Define a policy set, perform different
actions to out-of-profile data streams,
such as discard or degrade. This
policy can be used in one policy map
by several classes; the “no mls qos
aggregate-policer
<aggregate-policer-name>
”
command deletes the specified policy
set.