Amer Networks SS2R48G4i V2 - Manual (Page 62)

SS2R24G4i/SS2R48G4i
51
2. Configure SNMP community string
Command Explanation
snmp-server community {ro|rw}
no snmp-server community Configure the community string for the
switch; the “no snmp-server community
“ command deletes the configured
community string.
3. Configure IP address of SNMP management base
Command Explanation
snmp-server securityip
no snmp-server securityip Configure the secure IPv4/IPv6 address
which is allowed to access the switch on
the NMS; the “no snmp-server securityip
“ command deletes
configured secure address.
snmp-server SecurityIP enable
snmp-server SecurityIP disable Enable or disable secure IP address check
function on the NMS.
4. Configure engine ID
Command Explanation
snmp-server engineid < engine-string >
no snmp-server engineid < engine-string > Configure the local engine ID on the switch.
This command is used for SNMP v3.
5. Configure user
Command Explanation
snmp-server user
[[encrypted] {auth {md5|sha}
}]
no snmp-server user
Add a user to a SNMP group. This
command is used to configure USM for
SNMP v3.
6.Configure group
Command Explanation
snmp-server group
{NoauthNopriv|AuthNopriv|AuthPriv} [[read
] [write ] [notify
]]
no snmp-server group
{NoauthNopriv|AuthNopriv|AuthPriv}
Set the group information on the switch.
This command is used to configure VACM
for SNMP v3.
7. Configure view
Command Explanation
snmp-server view
{include|exclude}
no snmp-server view
Configure view on the switch. This
command is used for SNMP v3.