Amer Networks SS2R48G4i V2 - Manual (Page 49)

SS2R24G4i/SS2R48G4i
38
as described earlier in the In-band management section. As a Telnet server, SS2R24/48G4i switch
switch allows up to 5 telnet client TCP connections.
And as Telnet client, using telnet command under Admin Mode allows the user to login to the other
remote hosts. SS2R24/48G4i switch switch can only establish TCP connection to one remote host. If a
connection to another remote host is desired, the current TCP connection must be dropped.
5.2.2.2 Telnet Configuration Task List
1. Configuring Telnet Server
2. Telnet to a remote host from the switch
1. Configuration of Telnet Server
Command Explanation
Global Mode
telnet-server enable
no telnet-server enable
Enable the Telnet server
function in the switch the “no
telnet-server enable”
command disables the Telnet
function.
telnet-user password {0|7}
no telnet-user
Configure the username and
password to login to the switch
through Telnet ,the no
telnet-user
command disables Telnet
accredited user.
telnet-server securityip <ip-addr>
no telnet-server securityip
Configure the secure IP
address to login to the switch
through Telnet the “no
telnet-server securityip
“ command deletes
the authorized Telnet secure
address.
authentication login {local|radius|local
radius|radius local}
no authentication login
Configure validatory mode of
long-distance login in
Admin Mode
Monitor
no monitor
Display debug information for
Telnet client login to the switch;
the “no monitor” command
disables the debug information.
2. Telnet to a remote host from the switch