Amer Networks SS2R48G4i V2 - Manual (Page 76)

SS2R24G4i/SS2R48G4i
65
5.6.4.1.1 show channel
Command show channel [console | monitor | logbuff | loghost ]
Function To display brief information of the log channel.
Parameters console the output channel of log is console; monitor the output channel of log is the
user’s terminal; logbuff the output channel of log is the log buffer; loghost the output channel of log is
the log host.
Command Mode Privileged configuration mode.
Default Setting show channel will display the brief information of all the channels without any
parameter.
Relative Command logging on
5.6.4.1.2 show logging buffered
Command show logging buffered [<buffersize>]
Function To display detailed information of the channel of the log buffer
Parameters <buffersize> is the number of the log message to display
Command Mode Privileged configuration mode.
Default Setting 100 log messages will be displayed without any parameter.
Relative Command logging on，show channel logbuff
5.6.4.1.3 show logging lastFailureInfo
Command show logging lastFailureInfo
Function To display the abnormal information recorded in the flash
Command Mode Privileged configuration mode.
Relative Command erase logging lastFailureInfo
5.6.4.1.4 erase logging lastFailureInfo
Command erase logging lastFailureInfo
Function
To erase the abnormal information recorded in the flash
Command Mode
Privileged configuration mode.
Relative Command
show logging lastFailureInfo
5.6.4.2 System Log troubleshooting
Please check the following causes if any problem happens when using the system log
—
Check if the global log switch is on.
— Use the show channel command in the privileged mode to check the state of each channel
and the state of the modules in filter items.