6 exiting setup configuration mode – Amer Networks SS2R48G4i V2 User Manual

Page 29

SS2R24G4i/SS2R48G4i

Please input the read-write access community string[private]

Note the valid length for a read-write access community string is 1 to 255 characters, the default value

is “private”. When a valid read-write access community string is entered, pressing Enter returns you to

the SNMP configuration menu.

Select “1” in the SNMP configuration menu and press Enter, the following screen will appear
Please input the read-only access community string[public]
Note the valid length for a read-only access community string is 1 to 255 characters, the default

value is “public”. When a valid read-only access community string is entered, press Enter returns to the
SNMP configuration menu.

Select “2” in the SNMP configuration menu and press Enter, the following screen will appear

Please input traps-host IP address(A.B.C.D)
When the user enters a valid IP address for Traps host and presses Enter, the following appears
Please input traps community string[public]
Note the valid length for a traps community string is 1 to 255 characters, the default value is

“public”. When a valid traps community string is entered, press Enter returns to the SNMP configuration
menu.

Select “3” in the SNMP configuration menu and press Enter, the following screen will appear

Enable SNMP-server? (y/n) [y]
Type “y” and press Enter, or just press Enter to enable SNMP service, type “n” and press Enter to

disable SNMP service. The SNMP configuration menu appears.

Select “4” in the SNMP configuration menu and press Enter, the following screen will appear
Enable SNMP-traps ? (y/n) [y]
Type “y” and press Enter, or just press Enter to enable SNMP Traps, type “n” and press Enter to

disable SNMP traps. The SNMP configuration menu appears.

Select “5” in the SNMP configuration menu and press Enter, the following screen appears

Please input the new NMS IP address(A.B.C.D)
When a valid secure IP address(es) for SNMP management workstation is entered, press Enter to

return to the SNMP configuration menu.

Selecting “6” in the SNMP configuration menu will return to the Setup main menu.

3.3.6 Exiting Setup Configuration Mode

Select “5” in the Setup main menu to exit the Setup configuration mode without saving the

configurations made.