Amer Networks SS2R48G4i V2 - Manual (Page 53)

SS2R24G4i/SS2R48G4i
42
Function Configure the username and password of SSH client software for logging on the switch; the
“no ssh-user “ command deletes the username.
Parameter is SSH client username. It can’t exceed 16 characters; is SSH
client password. It can’t exceed 8 characters; 0|7 stand for unencrypted password and encrypted
password.
Command mode Global Mode
Default There are no SSH username and password by default.
5.2.3.3.3 ssh-server timeout
Command ssh-server timeout
no ssh-server timeout
Function Configure timeout value for SSH authentication; the “no ssh-server timeout” command
restores the default timeout value for SSH authentication.
Parameter is timeout value; valid range is 10 to 600 seconds.
Command mode Global Mode
Default SSH authentication timeout is 180 seconds by default.
5.2.3.3.4 ssh-server authentication-retries
Command ssh-server authentication-retries < authentication-retries >
no ssh-server authentication-retries
Function Configure the number of times for retrying SSH authentication; the “no ssh-server
authentication-retries ” command restores the default number of times for retrying SSH authentication.
Parameter < authentication-retries > is the number of times for retrying authentication; valid range
is 1 to 10.
Command mode Global Mode
Default The number of times for retrying SSH authentication is 3 by default.
5.2.3.3.5 ssh-server host-key create rsa
Command ssh-server host-key create rsa [modulus < modulus >]
Function Generate new RSA host key
Parameter modulus is the modulus which is used to compute the host key; valid range is 768 to
2048. The default value is 1024.
Command mode Global Mode
Default The system uses the key generated when the ssh-server is started at the first time.
5.2.3.3.6 monitor
Command monitor
no monitor
Function Display SSH debug information on the SSH client side; at the same time disable function of
debug information in console,the “no monitor” command stops displaying SSH debug information on