Amer Networks SS2R48G4i V2 - Manual (Page 38)

SS2R24G4i/SS2R48G4i
27
4.2.1 CLI Interface
CLI interface is familiar to most users. As aforementioned, out-of-band management and Telnet
login are all performed through CLI interface to manage the switch.
CLI Interface is supported by Shell program, which consists of a set of configuration commands.
Those commands are categorized according to their functions in switch configuration and management.
Each category represents a different configuration mode. The Shell for the switch is described below
z Configuration Modes
z Configuration Syntax
z Shortcut keys
z Help function
z Input verification
z Fuzzy match support
4.2.1.1 Configuration Modes
Fig 4-9 Shell Configuration Modes of SS2R24/48G4i switch
4.2.1.1.1 User Mode
On entering the CLI interface, entering user entry system first. If as common user, it is defaulted to
User Mode. The prompt shown is “Switch>“, the symbol “>“ is the prompt for User Mode. When exit
command is exit under Admin Mode, it will also return to the User Mode.
Under User Mode, no configuration to the switch is allowed, only clock time and version
information of the switch can be queries.
User Mode
Admin Mode
Global Mode
Interface Mode
Vlan Mode
DHCP
add
re
ss pool
configuration
mode
Route config
uration
mode ACL
configuration
mode